VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
4
SIM MODULE FEATURE IDENTIFICATION- ITA
PART # 510 171 101
1.
The top of the SIM ITA Module can be identified by the position A1 indicator. This is located
on the rear side and is designated by a notch
(Figure A
)
. Correct module orientation will
place the position A1 indicator in the upper left-hand corner.
2.
The front of the ITA module mates with the receiver module (
Figure B
). It also provides
access to the extraction tool cavities (
Figure C)
.
3.
The rear side contains the position A1 notch and markings closest to the edge of the frame
(Figures B & C)
. Wiring also exits from the rear side.
4.
Blue and white markings along the slot edges denote slot (insert) count. Each blue or
white marked area indicate 5 slot positions. (
Figure A
).
SIM ITA module.
Figure C
. Front view (mating side).
DETAIL B
TOP
EXTRACTION TOOL CAVITY
BOTTOM
FRONT
MATING
SIDE
Figure B.
Side view.
FRONT
MATING
SIDE
REAR
WIRING
SIDE
Figure A
. Rear view (wiring side).
INDICATES 5
SLOTS
POSITION A1 IND.
MOUNTING SCREWS
REAR
WIRING
SIDE
