VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
16
Figure B.
BRACKET MOUNTING HOLES (2)
MODULE MOUNTING
SCREW 2-56
(1/bracket)
PCB MOUNTING SCREWS M2
2/ bracket
BRACKET
BRACKET
Figure A.
Mating Module with PCB Assembly.
TOOLS REQUIRED
Phillips screw driver
INSTALLATION
NOTE:
Instructions apply to both ITA and receiver SIM modules, as well as i2 MX
Receivers.
1
. Using the previous instructions for installing
VTAC Pass-Thru Insert(s), install
into the appropriate SIM module for mating with the PCB-mounted right
angle headers. Ensure that the necessary module slots contain mating
inserts for the PCB's mounted headers. For the purpose of this application,
the mating side of the VTAC Pass-Thru insert is the rear.
2.
Mate module with PCB assembly. Both ITA and receiver modules will mate to
the PCB via the rear side. The module markings should be on top (
Figure A
).
3.
Once the module and PCB are fully mated, use the PCB mounting brackets
to fully attach the module to the PCB (
Figure B
)
. Insert the PCB mounting
screws, but do not tighten completely. Insert the module mounting screws.
Torque #2-56 and M2 screws to 1.5 in-lbs [0.17Nm]
.
MATING SIM MODULE/ i2 MX RECEIVER TO PCB-MOUNTED VTAC HEADERS
PART # 310 130 114, 310 130 113, 510 109 592, 510 170 101, 510 171 101, 610 151 104
