manualshive.com logo in svg

Voxtec SQU.ID SQ.410, User Manual

Share
Download
Voxtec SQU.ID SQ.410 User Manual Download Page 37

31

SQU.ID

®

 SQ.410

say.  However, factors such as background noise, improper 
microphone placement, pauses and other irregularities of speech 
can cause recognition errors.  In some cases, instead of hearing 
the correct English verification in your headset earpiece, you may 
hear the no-recognition tone.  In other cases, you may simply 
hear the wrong phrase verified back in your headset earpiece.  
To interrupt the SQ.410 from playing the incorrectly identified 
phrase, tap the PUSH TO TALK or A button.  Then, press and 
hold the PUSH TO TALK or A button and say the English word or 
phrase again.  If you continue to have recognition issues, try the 
following potential fixes:
1.  Ensure the micro-SD card (with application software) is 

properly installed in the device.

2.  Confirm in Settings that the correct microphone input has 

been selected.

3.  If using the optional TACK-1 headset, confirm that you are 

wearing it properly.  The headset earpiece is designed to fit 
over your left ear.

4.  If using the optional TACK-1 headset, also confirm that 

the headset microphone is in proper position.  It should be 
positioned close to the left corner of your mouth, about two 
inches away from your lips. Do not let the microphone touch 
against your face while speaking.

Example of proper headset position (below):

Summary of Contents for SQU.ID SQ.410





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands