Voxtec SQU.ID SQ.410, User Manual

Page: 21 / 68

15
SQU.ID
®
SQ.410
releasing the power button will simply wake up the unit without
taking further action. Pressing any other button will wake up
the unit as well, but will also complete any action normally
performed by the button based on what the application was
doing before the unit went into standby (e.g., if the last action
performed was playing a phrase in the module, pressing the
center button will play the highlighted phrase).
• Set Time:
The device’s internal clock may be adjusted to reflect
local time. Time is set in 24-hour format. To adjust time: (1) use
the UP and DOWN buttons to increase or decrease the hour,
then press the CENTER button when the correct hour is shown;
(2) use the UP and DOWN buttons to increase or decrease the
minute, then press the CENTER button when the correct minute
is shown; and (3) press the RIGHT button to accept the changes.
Note that pressing the LEFT button will cancel the changes.
• Set Date:
Similar to setting time, the internal clock may be
adjusted to reflect a new day, month and year. Although the
device’s date is set at the factory and should not vary even after
repeated battery changes and power cycles, this functionality is
provided in the event of discrepancies that might arise in adjusting
the time to a local time zone. To adjust the date: (1) use the UP
and DOWN buttons to increase or decrease the month, then
press the CENTER button when the correct month is shown; (2)
use the UP and DOWN buttons to increase or decrease the day,
then press the CENTER button when the correct day is shown;
(3) use the UP and DOWN buttons to increase or decrease the
Year, then press the CENTER button when the correct year is
shown; and (4) press the RIGHT button to accept the changes.
Note that pressing the LEFT button will cancel the changes.
Advanced Features
• English Verification:
The selections are “None”, “Speech
Selections Only”, “Button Selections Only”, and “Both”. When
“Speech Selections Only” is selected using the ASR to select
a phrase will first play English then the foreign language.