manualshive.com logo in svg

Voxtec SQU.ID SQ.410, User Manual

Share
Download
Voxtec SQU.ID SQ.410 User Manual Download Page 24

18

www.voxtec.com

 

o

Timeout To Standby:  Never

 

o

English Verification:  Speech Selection Only

 

o

English Verification to Speaker:  Off

 

o

Primary Mic Automatic Gain:  On

 

o

Secondary Mic Automatic Gain:  On

 

o

Select Connected Microphone:  Primary Only

 

o

Enable Built-in Speaker:  On

 

o

Set Constant Logging:  Off

Programming Hot Buttons for Quick Play mode

The SQ.410 has three “hot buttons” featured on the side of 
the device that are labeled A, B and C.  These buttons can be 
programmed to accommodate Quick Play mode, which enables 
you to broadcast one of three preselected phrases quickly 
without having to say the phrase into the SQ.410 in English first.

To program a Hot Button for Quick Play mode:

1.  Be sure the word or phrase you would like to store as a quick play 

was just broadcast and remains displayed on the main screen.  In 
the example below, you want to store the Arabic translation for the 
question: “Do You Speak English?” so that when you hit the quick 
play button it will immediately play the Arabic translation for this 
question out of the SQ.410’s speaker.

SQ.410 Main Screen

Summary of Contents for SQU.ID SQ.410





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands