Voxtec SQU.ID SQ.410, User Manual

Page: 12 / 68

6
www.voxtec.com
Batteries
The SQ.410 operates on two CR123A lithium batteries that slide
into the battery tube. Unscrew the cap and insert the batteries
negative side first, with the last battery’s positive terminal touching
the inside of the battery cap. If you insert the batteries incorrectly,
the unit will not power on. If you notice the unit not working,
troubleshoot by inspecting that the batteries are installed correctly.
Micro-SD Card Removal and Replacement
Translation software for the SQ.410 is stored on a removable
micro-SD card found under a secured flapper door on the
bottom of the unit. Note that the SQ.410 ships with a 32 GB
micro-SD card already installed.
CAUTION:
DO NOT REMOVE THE MICRO-SD CARD
WHILE THE UNIT IS TURNED ON. DOING SO MAY DAMAGE
THE MICRO-SD CARD OR CORRUPT THE TRANSLATION
SOFTWARE RENDERING IT UNUSABLE.
To remove the micro-SD card:
1. Ensure that the unit is fully powered down.
2. Use a small Philips screwdriver to remove the screw securing
the bottom flapper door.
3. Use gentle pressure with a fingernail or solid pointed object
to push the card in slightly until the internal cradle spring
releases and pushes the card part way out of the unit.
4. After the cradle spring has pushed the card part of the way
out, grab the card and fully remove it from the unit.
To replace the micro-SD card:
1. Ensure that the unit is fully powered down.
2. Insert the thinner, notched end of the card first into the unit,
ensuring that the top of the card (logo bearing side) is facing
the same direction as the front of the unit.
3. Push the card gently into the slot until it clicks into place.