manualshive.com logo in svg

Voxtec SQU.ID SQ.410, User Manual

Share
Download
Voxtec SQU.ID SQ.410 User Manual Download Page 35

29

SQU.ID

®

 SQ.410

Power Management

The SQ.410 operates on two CR123A lithium batteries.  In most 
typical use scenarios the unit should last at least 8 hours on 
one set of batteries. Standard disposable CR123A batteries are 
recommended.  Although rechargeable CR123A batteries exist 
in the market, Voxtec does not recommend their use because 
the unit may behave erratically, even if useable the device will 
probably have significantly less than 8 hours of use, and the 
battery meter displayed on the SQ.410’s screen will not be 
accurate.

Checking Battery Status

The battery meter located at the top right of the SQ.410 software 
application screen shows the current battery status.  Example 
battery meter progression (from left to right) during use:

          
It is time to swap fresh batteries when the unit displays the single 
red bar warning.

Note:

  If your SQ.410 loses power during use, you will not lose 

the software application, modules, or audio recordings you have 
created, which are all stored on the internal storage and the 
removable card.

Summary of Contents for SQU.ID SQ.410





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands