Install Z-axis motor kit, T-shaped screw rod and power supply kit
2
Step 1: Lock the T-shaped screw
rod on the Z-axis motor kit, and
then use two
hexagon socket
countersunk head
screw
s M4x20 to
slightly lock the Z-axis motor kit
on the profile (as shown below).
Z-axis motor kit *1
T-shaped screw rod *1
Hexagon socket countersunk
head screw M4x20 *2
Step 2: Install the power supply kit on Z-axis profile with two
hexagon socket head cap
screws M4x20. The power switch
should be outside (as shown in left figure).
M4x20
M4x20
08
Power supply
kit *1
Hexagon socket head cap
screw M4x20 *2
Back
Front
安装Z轴电机组件，T型丝杆和电源组件
电源组件 *1
Z轴电机组件 *1
T型丝杆 *1
内六角圆柱头螺钉M4x20 *2
内六角沉头螺钉M4x20 *2
步骤1：将T型丝杆插入Z轴电机上方
的联轴器并锁紧；用2颗内六角沉头
螺钉M4x20将Z轴电机组件安装到型
材上（如图所示）。
步骤2：用2颗内六角圆柱头螺钉M4x20将电源组件安装在Z轴型材
上；电源开关一面朝外（如图所示）。
背面
正面
