Install spool holder and profile cover
8
Step: Put two M4x6 screws and two T nuts into the material rack (as shown), place the spool holder on
the rack and fix on the profile with screws (as shown); then place the 2020 profile cover on both side.
Material rack *1
Material pipe and
nut *1
2020 profile cover *2
T nuts *2
Hexagon socket button
head screws M4x6 *2
M4x6
T nuts
Connect the filament tube
Install it on the left
15
安装料架和型材盖
将料架筒及料架螺母安装在料架上，用2颗M4x6螺钉及2颗T型螺母将组装好的料架固定在顶部型材上（如图所示）。
料架 *1
料架筒和螺母 *1
2020 型材盖 *2
T型螺母 *2
T型螺母
连接导丝管
安装在左侧
内六角平圆头螺钉M4x6 *2
