Series M22/M23/M24 Instruction Manual
Chapter 3 Operation
M-000-00010
3-15
Time & Date Menu
Password
ENTER
Use
keys to access menus
Time & Date
Menu
Set Time
xx:xx:xx
ENTER
Run Mode
Set Date
xx/xx/xx
Use the Time and Date Menu to enter the correct time and date into the flow meter’s
memory. The parameters are used in the Run Mode and the alarm and system log
files.
Note: Time is displayed in AM/PM format, but military format is used to set the time.
For example, 1:00 PM is entered as 13:00:00 in the Set Time menu.
Example for Setting the Time
How to set the time to 12:00:00. You can check the time in the Run Mode by pressing the
keys
until the Time & Date screen appears. Note: all outputs are disabled while using the Setup Menus.
1.
Use
keys to move to the Time and Date Menu.
2.
Press
key until Set Time appears. Press
ENTER
.
3.
Press
key until 1 appears. Press
key to move the underline cursor to the next digit.
Press the
key until 2 appears. Continue sequence until all desired parameters are en-
tered. Press
ENTER
to return to the Time and Date Menu.
4.
Press
EXIT
to return to the Run Mode.
Summary of Contents for Pro-T
