Series M22/M23/M24 Instruction Manual
Chapter 4 Serial Communications
M-000-00010
4-25
3.3.
Binary Input Object:
Vortex Mass Flow Meters Binary Input type objects are described
in the below Table.
Object
Instance
Object
Name
Description
1
Alarm1
The status of the three alarms may be monitored
via the Modbus command. The value returned
indicates the state of the alarm, and will be 1 only
if the alarm is enabled and active. A zero value is
transmitted for alarms that are either disabled or
inactive
2
Alarm2
3
Alarm3
4
External TBD
Note - Binary Input 4, Present value always read zero, because no
information available from client, so the polarity property doesn’t
impact on Present value property when the Out of service
property is false.
3.4.
Binary Value Object:
Vortex Mass Flow Meters Binary Value type objects are described
in the below Table.
Object Instance
Object Name
Description
1
Reset
Reset’s
Totalizer
Summary of Contents for Pro-T
