54
M3903758
Position the horn ring and position it as illustrated.
Plug in the installed keypad connector to the terminal on the back
side of the keypad on the right-hand side of the horn ring. The
cable from the installed keypad is very short and it is not easy to
plug into the connector.
55
Reinstall the horn. Ensure that the three springs are in place and
check that the ground lead is not trapped.
Tighten the screws alternately to 6.5 Nm (5 lbf.ft.).
Reinstall the ground lead. Tighten.
Plug in the horn connector and keypads.
Check the function of the horn ring by pressing around the entire
edge.
56
R6400820
Check that the two springs (1) are in position
Position the steering wheel module and press the two airbag
transmitter cable connectors firmly in place.
Insert the two lugs on the back side of the steering wheel
module into the two springs and make sure the transmitter cables
are not obstructed.
Press the steering wheel module firmly into its mountings. Two
clearly audible clicks should be heard.
Reinstall the surround for the combined instrument panel and the
steering wheel cover.
Note!
The cables must be routed through the existing holder (2).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, RTI- 31260737 - V1.2
Page 25 / 26
