25
IMG-393650
Applies to all cars
Take the cable harness (A) from the kit.
26
IMG-251403
Take the two cable harnesses, power supply/fibre optic cable
harness (A) and the cable harness (B) for the display screen
from the kit. Route them up along the air duct on the left-hand
side of the centre console.
The power supply/fibre optic cable harness (A) is located inside
the centre console.
Pull the cable harnesses backwards, in front of the carpet on the
center console's left-hand side, under the left-hand seat's seat
rail, and out through the carpet join under the seat.
Route the antenna cable (C) the same way as cable harness (A)
to below the seat.
Note!
Do not damage the fibre optic cables. They must not be bent to
a radius less than 30 mm (1 11/64") as they can damage and
affect the function of the system.
Note!
In cases where the TMC cable (Europe) requires to be routed
in the same way as cable harness (1). The double connection
must be connected to IAM.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, RTI- 31260737 - V1.2
Page 14 / 26
