27
IMG-268410
28
IMG-241303
Take the cable with the two 4 pin connectors and route
forward on the driver's side
Locate the 4 pin, grey connector for the power supply. It is
secured on the thick cable harness under the dashboard on the
driver's side.
Note!
The pre-routed connector is already connected on certain
versions
29
IMG-268502
Connect the cable harness to the existing connector (1).
Wrap a piece of foam tape around the connected connectors
and cut off the excess.
Install the connector (2) on the car's existing cable harness
using a cable tie.
Note!
The pre-routed connector is already connected on certain
versions. In such a case, disconnect it and connect both
connectors from the new cable harness. Wrap a piece of foam
tape around the connectors.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, RTI- 31260737 - V1.2
Page 15 / 26
