36
IMG-250480
Take the bend protection from the kit and attach it with tape as
illustrated. The bend protection is to prevent the fiber optic cable
from bending too much, being damaged and risking malfunction
of the accessory.
37
IMG-326564
Plug in the connectors.
Reinstall the radio/A/C unit by first hooking the upper edge
into place. Then press upwards and angle in the lower section.
If the radio/A/C unit does not fit at the rear edge, check that
no cables have been trapped.
Reinstall the screws
Note!
When reinstalling the centre console, the fibre optic cable to
MOST must be positioned so that it does not get trapped when
the centre console is reinstalled.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, RTI- 31260737 - V1.2
Page 18 / 26
