46
M6400670
Insert a screwdriver in the hole along the rear edge of the
steering wheel perpendicular to the rear surface of the steering
wheel.
Insert the screwdriver as far as possible to find the end of the
locking spring (1).
Place the end of the screwdriver on the top of the locking spring.
Move the screwdriver upwards towards the upper edge of the
hole (2) until the spring releases and one side of the steering
wheel module detaches from the mounting.
Turn the steering wheel 180º and repeat the operation on the
other side.
Turn the steering wheel to a neutral position.
47
R6400818
Fold the steering wheel module out
Unplug the two connectors (1) to the airbag transmitter cables.
Place the steering wheel module to one side.
Note!
The connectors are tightly secured. However, tools must not
be used when removing.
48
R6400819
Remove:
the screw (1) and detach the ground lead.
the horn connector (2) and keypads.
the three screws (3) and lift out the horn ring (4).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, RTI- 31260737 - V1.2
Page 22 / 26
