Operation
Correct operating technique is very important for both fuel economy and engine life. Always let the engine warm
up to normal operating temperature before operating at full power. Avoid sudden throttle openings and operation
at high engine rpm.
Reading the Instruments
Check all instruments directly after starting, and then
regularly during operation.
NOTICE!
On engines in continuous operation, the
lubrication oil level must be checked at least every 24
hours. Refer to
Oil level, checking and topping up
.
Check all instruments directly after starting, and then
regularly during operation.
NOTICE!
On engines in continuous operation, the
lubrication oil level must be checked at least every 24
hours. Refer to
Oil level, checking and topping up
.
Alarms
If the EMS 2 system receives abnormal signals from
the engine, the control unit generates fault codes and
alarms, in the form of lamps and audible warnings. This
is done by means of CAN signals to the instrument.
More information about fault codes and fault tracing
can be found in the chapter.
Fault
Handling page 30
.
26
47702660 03-2013 © AB VOLVO PENTA
