Power Standards
The engine performance corresponds to ISO 3046, BS
5514 and DIN 6271. The technical data applies to an engine
without cooling fan and operating on a fuel with calorific value
of 42.7 MJ /kg (18360 BTU/lb) and a density of 0.84 kg/liter
(7.01 lb/US gal), also where this involves a deviation from
the standards. Power output guaranteed within 0 to +2% att
rated ambient conditions at delivery. Ratings are based on
ISO 8528.
Engine speed governing in accordance with ISO 3046/IV,
class A1 and ISO 8528-5 class G3
Exhaust emissions
The engine complies with EU stage 2 emission legislation
according to the Non Road Directive EU 97/68/EC.
Rating Guidelines
PRIME POWER rating corresponds to ISO Standard Power for
continuous operation. It is applicable for supplying electrical power
at variable load for an unlimited number of hours instead of com-
mercially purchased power. A10 % overload capability for govering
purpose is available for this rating.
MAXIMUM STANDBY POWER rating corresponds to ISO Stan-
dard Fuel Stop Power. It is applicable for supplying standby electri-
cal power at variable load in areas with well established electrical
networks in the event of normal utility power failure. No overload
capability is available for this rating. 1 hp = 1 kW x 1.36
Information
For more technical data and information, please look in the Gener-
ating Set Engines Sales Guide.
http://www.brizmotors.ru/equipment/ctm/
v250a/
TAD734GE
Technical Data
General
Engine designation ...........................................................................TAD734GE
No. of cylinders and configuration ........................................................in-line 6
Method of operation ................................................................................4-stroke
Bore, mm (in.) ......................................................................................108 (4.25)
Stroke, mm (in.) ...................................................................................130 (5.12)
Displacement, l (in³).......................................................................7.15 (436.0)
Compression ratio ..........................................................................................17:1
Dry weight, excl. cooling system, kg (lb) .................................... 764 (1684)
Wet weight, excl. cooling system, kg (lb) ....................................788 (1737)
Performance
1500 rpm
1800 rpm
with fan, kW (hp) at:
Prime Power
213 (290)
216 (294)
Max Standby Power
238 (324)
243 (330)
Lubrication system
1500 rpm
1800 rpm
Oil consumption, liter/h (US gal/h) at:
Prime Power
0.03 (0.008)
0.03 (0.008)
Max Standby Power
0.03 (0.008)
0.03 (0.008)
Oil system capacity incl filters, liter ............................................................... 29
Fuel system
1500 rpm
1800 rpm
Specific fuel consumption at:
Prime Power, g/kWh (lb/hph)
25 %
244 (0.396)
257 (0.417)
50 %
233 (0.378)
237 (0.384)
75 %
217 (0.352)
222 (0.360)
100 %
204 (0.331)
205 (0.332)
Max Standby Power, g/kWh (lb/hph)
25 %
247 (0.400)
259 (0.420)
50 %
235 (0.381)
239 (0.387)
75 %
217 (0.352)
225 (0.365)
100 %
205 (0.332)
207 (0.336)
Intake and exhaust system
1500 rpm
1800 rpm
Air consumption at 27°C, m³/min (cfm):
Prime Power
16.1 (569)
18.3 (646)
Max Standby Power
16.3 (576)
18.9 (667)
Max allowable air intake restriction,
kPa (In wc)
3.0 (12.0)
3.0 (12.0)
Heat rejection to exhaust,
kW (BTU/min) at:
Prime Power
160 (9099)
174 (9895)
Max Standby Power
177 (10066)
189 (10748)
Exhaust gas temperature after
turbine, °C (°F) at:
Prime Power
495 (923)
475 (887)
Max Standby Power
550 (1022)
510 (950)
Max allowable back-pressure in
exhaust line, kPa (In wc)
10 (40.2)
10 (40.2)
Exhaust gas flow, m³/min (cfm) at:
Prime power
33.0 (1165)
36.7 (1296)
Max Standby Power
33.4 (1180)
37.9 (1338)
Cooling system
1500 rpm
1800 rpm
Heat rejection radiation from engine,
kW (BTU/min)
Prime Power
24 (1365)
25 (1422)
Max Standby Power
26 (1479)
28 (1592)
Heat rejection to coolant kW (BTU/min)
Prime Power
117 (6654)
124 (7052)
Max Standby Power
128 (7279)
137 (7791)
Fan power consumption, kW (hp)
11.6 (16)
20.0 (27)
Standard equipment
Engine
Automatic belt tensioner
•
Lift eyelets
•
Flywheel
Flywheel housing with conn. acc. to SAE 2
•
Flywheel 10” and 11.5” disc
•
Vibration damper
•
Engine suspension
Fixed integrated radiator front engine suspension
•
Lubrication system
Oil dipstick
•
Full-flow oil filter of cartridge type
•
Oil cooler, side mounted
•
Fuel system
Common rail
•
Fuel filters of cartridge type
•
Pre-filter with water separator
•
Intake and exhaust system
Two-stage air filter with cyclon
•
Connecting flange for exhaust pipe
•
Turbo charger, low left side
•
Cooling system
Tropical radiator incl intercooler
•
Belt driven coolant pump
•
Fan hub
•
Pusher fan
•
Fan guard
•
Belt guard
•
Control system
Engine Management System (EMS) with CAN-bus
interface SAE J1939 and stand alone interface
•
Alternator
Alternator 100A / 24 V
•
Starting system
Starter motor, 5.0kW, 24 V
•
Instruments and senders
Temp.- and oil pressure for automatic
stop/alarm
•
Engine Packing
Plastic wrapping
•
1)
must be ordered, se order specification
−
optional equipment or not applicable
•
included in standard specification
Note! Not all models, standard equipment and accessories are available in all countries.
All specifications are subject to change without notice.
The engine illustrated may not be entirely identical to production standard engines.
English 11-2011. © 2011 AB V
olv
o P
enta
1320
1858
1651
1050
Dimensions TAD734GE
Not for installation
