manualshive.com logo in svg

Volvo Penta 3.0GL-B, Operator'S Manual

Share
Download
Volvo Penta 3.0GL-B Operator'S Manual Download Page 51

49

7741591 / 2003-12

Operating remote controls

Familiarize yourself with remote control operations before
starting the engine.

Side mount control

To disengage the shift mechanism:

1.

Place the control handle in 

NEUTRAL.

2.

Press both 

NEUTRAL lock button and the SHIFT DIS-

ENGAGE button.

3.

Move control handle 

FORWARD to increase throttle.

The 

NEUTRAL lock and shift mechanism will automati-

cally engage when the control handle is returned to
NEUTRAL.

Top mount control

To disengage the shift mechanism:

1. Push in and hold shift disengagement button.

2. Move control handle 

FORWARD to increase throttle.

The shift mechanism will automatically engage when the

control handle is returned to 

NEUTRAL.

Stopping the engine

1.

Move the remote control handle to 

NEUTRAL.

2.

Let engine return to idle.

3.

Turn ignition key to 

OFF.

CAUTION!

Do not stop the engine at speeds above idle or “speed
up” the engine while turning off the ignition. Do not
stop the engine while in gear or while the boat is mov-
ing. Engine damage could result.

Operation

7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39

Summary of Contents for 3.0GL-B













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands