17
Turn the block with the brake on the rear axle in such a way that the bubble in the built-in spirit level is between the
marks. The spirit level is on the top of the block behind the brake carrier and is best accessible when looking from the
back of the stroller/baby buggy.
Owing to precise manufacturing tolerances, it is relatively hard to turn the rear axle block even with the quick-acting
clamping bolt loosened; when the lever is locked, the block is then fixed on the axle firmly and reliably.
When checking the block position setting, the stroller must stand stably on all three wheels.
1
–
rear axle block/hub lock release
2
–
rear axle block trimming
Figure 21
Obrázek 22
After the block is set to the correct position, lock again the lever of the quick-acting clamping bolt.
Repeat the same procedure with the other wheel.
Finally, recheck the alignment according to the spirit levels on the left and right blocks. The correct alignment is a
guarantee of excellent driving properties of the stroller/baby buggy.
UPOZORNĚNÍ !
Vždy dbejte na správné nastavení
geometrie zadních kol vozíku.
V
případě špatné manipulace a
provozu vozíku s
nesprávně
nastavenou geometrií může dojít
k
rychlé destrukci plášťů kol a
k
havárii vozíku/kočárku.
