32
Figure 53
1
–
shoulder straps fixed on the frame tube
2
–
zipper on shoulder straps
Figure 54
With the upper two snaps (Fig. 54) fix the insert on the counterparts (Fig. 55) which are located on the rear side of the
flap of the stroller/baby buggy seat. As necessary, select the fixation height of the shoulder straps and lower middle
strap. The shoulder straps have 2 adjustment heights, the lower middle strap also has 2 variants. Before the final pull-
through and mounting of the straps back on the stroller construction, seat your child inside the seat to find out the
correct adjustment of these straps and to choose the correct holes for straps.
Then pull over the shoulder straps (pads) and with the zipper on the external side of the seat tighten them so that they
cover the straps and buckles well and do not slide down on the straps.
With other snap hooks you can adjust the required ranges of individual fixation strap parts. Place the protective and
fixation pads in the stroller so that they fix the head of the transported person well, and the middle wedge to prevent the
person from slipping off. All must be adjusted in such a way that the transported person has the maximum comfort.
The transported person must be fixed firmly, but the strap must not clasp or otherwise limit them. A slight movement of
the fixed person is possible and desirable (Fig. 30).
The manufacturer supplies fixation inserts in the respective colour combinations like the stroller models.
Figure 55
