15
To loosen the wheel it is also necessary to loosen the nut on the opposite side of the axle by a few turns. The wheel can
then be removed from the fork. The place for storing this wheel with fork is in the rear pocket of the rear bag on the
stroller/baby buggy.
Figure 16
Figure 17
Perform assembly in reverse order.
The 6” wheel is fixed in the fork with an
Allen head bolt with nut which serves also as the axle. If necessary, this bolt can
be loosened and the wheel removed.
2. Adjusting the required alignment of the stroller/baby buggy
Select the required
front wheel
and fix it along with the fork to the front axle block (for the procedure see above). The
block is symmetrical, it can be used from both sides if necessary.
Loosen the inner pair of vertical quick-acting clamps on the front axle.
Turn the wheel with fork to the required position. The tilt of the whole stroller/baby buggy can be changed by selecting
the wheel size and turning the fork. In this way the maximum comfort of the transported person can be ensured.
Turn the inner pair of vertical quick-acting clamps so that their levers do not collide with the vertical clamps.
Lock the levers of the inner pair of vertical quick-acting clamps. The front block is now firmly fixed to the cross axis of the
front axle.
The 6” front wheel can be positioned in the following range:
Figure 18
