13
1.2 Front axle
The front wheels with forks are fixed to the stroller/baby buggy with quick-acting clamps. Loosen the lever to unlock the
clamp, tighten it to lock the clamp; locking can be regulated by tightening or loosening the nut on the opposite end of
the bolt. Handle the nut only by hand when the clamp is unlocked.
The front axle assembly contains six quick-acting clamps; the two horizontal ones serve for fixing the fork with the front
wheel, the inner vertical pair serves for adjusting the fork tilt and the outer vertical pair serves for fixing and adjusting
the cross tube of the front axle. Additional towing devices can be fixed to the outer ends of this tube.
The whole assembly is delivered in assembled and adjusted state; the owner only fixes the selected front wheel with fork
and adjusts the required fork tilt.
Figure 11
1.2.1 Assembly of the front fork with wheel
Loosen both horizontal clamps on the front axle block and slide the fork extension in the hole in the block. The clamps
are fixed to the block also in loosened state with the mount engaged in the block slot. This prevents the clamp from
slipping off or losing. The clamp can only be removed from the block using a special tool.
Figure 12
1
–
Fixing the position of the front axle
cross tube
2
–
Adjusting and fixing the front fork
tilt
3
–
Front fork attachment
4
–
Fron
t fork with 6“ swing wheel
5
–
Towing eye
