At the box-type delivery van/station wagon, attachment and base group form a self-supporting unit.
Supporting parts of
this self-supporting unit must not be removed without being replaced by another component.
Baffles have no supporting function. Modifications, even the complete removal, are permitted.
A. Cut-outs in the side wall
Since the subsequent installation of windows is complicated and expensive,
it is recommended to order the desired
windows ex works (see delivery program)
.
Cut-outs
for windows, doors, tailboards, ventilation, etc., may
only be realised between the supporting parts
(pillars,
roof chassis and floor).
Supporting parts must not be cut or weakened.
The cut-outs are to be provided with a
continuous frame which is to be connected force-locking with the bordering supporting parts.
Retrofitting of windows
If windows are to be retrofitted, the following operation method can be implemented:
1.
Cut out the exterior plate along the window case of the interior plate and insert, for example, a pane with the
corresponding rubber seal (accessory parts). The serial differences between box-type delivery van and station wagon in
the window area are represented below.
2.
Prepare the window cut-out according to the series requirements. Insertion of standard panes. Details on the procedure
are available on request.
3.
If you desire smaller windows than shown below, the following applies: In general, the cut-out may only be realised
between the pillars.
Supporting parts must not be cut or weakened.
The cut-out is to be provided with a frame which is
to be connected force-locking with the bordering supporting parts.
38
