-35
2,0
-20
-25
1,0
-35
1,5
-25
-35
1,0
-30
-35
0,5
-35
-40
0,5
- Check coolant additive concentration after test drive
again.
Checking coolant level and adding coolant if necessary
- Check coolant level in expansion tank with engine cold.
Note:
Check coolant level and top off if necessary. With
engine at operating temperature, coolant level must
be at top marking, with engine cold, it must be in
center of hatched area.
Delivery inspection: Coolant level above the "MIN
marking"
- arrow -
.
Inspection service: Coolant level above the "MIN
marking"
- arrow -
.
- If coolant is too low, add required amount according to
mixture ratio.
Note:
Determine cause of fluid loss which cannot be
attributed to normal use and rectify (repair
measure).
Page 24 / 37
Description of work (part 1 of 2)
