Volkswagen EOS 2006 Service Training Download Page 54

Page: 54 / 62

Electrical System

S355_030

S355_031

S355_132

Lights

Headlights

The headlights are equipped with the Advanced

Frontlight System AFS including the Bi-Xenon

cornering lights and automatic turn-off light for

improved road illumination. The maximum swivelling

angle of the cornering light is 15°. The turn-off light is

aligned at approx. 80° to the car longitudinal axis.

Both functions are activated by turning the steering

wheel or switching on the turn signals.

You will find more information on the

cornering lights in self-study programme

SSP 335 “Cornering Light System”.

Taillights

The taillights are divided by the boot lid. The reverse

lights and the rear fog lights are located in the

respective boot lid sections. The sidelight, brake and

turn signal functions use LED technology on the Eos.

The taillight, reverse light and rear fog light functions

use normal bulbs.

Summary of Contents for EOS 2006































































Search results

Summary of Contents for EOS 2006

Reviews:

Related manuals for EOS 2006

Brands by name

Popular brands

Volkswagen EOS 2006, Service Training

Search results

Summary of Contents for EOS 2006

Reviews:

Related manuals for EOS 2006

Brands by name

Popular brands