42
Engines
The 1.6l/85kW FSI engine
The 1.6l/85kW FSI engine from the Golf Plus and
Touran is available for the Eos. The following features
have already been used in series production in these
models.
Technical features
●
Lambda-1 operation (homogeneous operation)
●
There is no fuel pressure sender for low pressure
G410. The required fuel quantity is determined
from the coolant temperature, intake air
temperature and oil temperature. The pulse control
factor (PWM signal) for controlling the electrical
fuel pump is then obtained using a map.
●
The connecting tube between the cylinder head
and exhaust gas recirculation valve has changed.
The exhaust gases are diverted away from the
throttle valve in the intake manifold. This prevents
coking of the throttle valve to a great extent.
●
The engine control unit software has been adapted
to the changes.
S355_084
Torque and power diagram
To
rq
u
e
[
N
m
]
Po
w
e
r [
kW
]
20
40
60
80
100
120
140
160
180
10
20
30
40
50
60
70
80
90
1000
3000
5000
Engine speed [rpm]
S355_086
7000
Do not run the car with Normal unleaded
RON 91 because the ignition retardation
will reach its control limit.
Engine code
BLF
Type
4-cylinder in-line engine
Displacement
1598cm
3
Bore
76.5mm
Stroke
86.9mm
Valves per cylinder
4
Compression ratio
12:1
Maximum output
85kW at 6000 rpm
Maximum torque
155Nm at 4000 rpm
Engine Management
Bosch Motronic MED 9.5.10
Fuel
Super unleaded RON 95
(torque increase in mid
rev range when Super
unleaded RON 98 is used)
Exhaust gas treatment
Starter catalytic converter,
main catalytic converter,
Lambda control
Emissions standard
EU4
Technical data
