33
Sliding lining
on roof side members
To store the CSC roof in the boot, the lining of the roof
side member needs to be shortened during the
opening process.
This is caused by sliding gate 3, which is operated by
tensioning tapes 1 and 2.
Tensioning tape 1 pulls the lining together via slider 3
when the roof is opened. Tensioning tape 2 opens out
the lining via slider 3 when the roof is closed. The
tensioning tapes run through various lugs. Tensioning
tape 1 is also fed through a guide spring.
Moving tensioned headliner
The tensioned headliner is folded in a controlled
method when the CSC roof is opened. The tensioning
tapes 1, 2, 3 and 4 on each side of the car are used
for this. Rubber cord 5 is used as a guide for
tensioning tape 4.
Precise laying and fastening of the tensioning tapes is the requirement for perfect and lasting operation
of the CSC roof.
Make sure you read the related repair literature before carrying out work on the tensioning tapes.
S355_159
S355_158
3
4
5
2
1
Side section of tensioned
headliner with reinforcements
Sliding
gate 3
Guide spring
Tensioning tape
2
Tensioning tape 1
Roof side member
interior lining
Deflector lug
Deflector lug
