By Initial Auto Store, for FM/AM AS level, the preset stations are completely same as by Auto Store.
For FM2, if the stations are =< 6, then FM1 is copied to FM2.
If the stations are > 6, then FM1 and FM2 are treated as one FM level.
If none station is found, radio will display “NO STATION" per 2 seconds and then returns to the frequency where the
searching started. In this case all memory presets remain as default defined.
If short press SK button without station, radio will display “NO STORE” per 2 seconds.
5.4 Frequency Store and Recall
Short press soft key button, may recall the preset station which stored in the button.
Long press soft key button, the current station will be stored into the button and soft key button is underlined, radio
will also output’s beep sound. Radio display will show 1 to 6 in the bottom line.
Default preset memory frequencies FM
Tuning
(MHz)
FM 1
FM 2
FM AS
Power
up
88.3
88.3
88.3
Soft
Key 1
88.3
87.9
88.3
Soft
Key 2
89.1
88.1
89.1
Soft
Key 3
94.1
98.1
94.1
Soft
Key 4
99.1
96.3
99.1
Soft
Key 5
106.1
107.9
106.1
Soft
Key 6
88.3
103.7
88.3
Default preset memory frequencies AM
Tuning
(kHz)
AM
AM AS
Power
Up
530
530
Soft
Key 1
530
530
Soft
Key 2
600
600
Soft
Key 3
1050
1050
Soft
Key 4
1400
1400
Soft
Key 5
1710
1710
Soft
Key 6
530
530
5.5 Scan
Enable scan play function with short press the
right encoder.
Radio will play the received station for 5 seconds then continue to seek for next available station.
After scan 1 cycle, radio will stop scan and revert to previous play mode.
Short press theright encoder to cancel the scanning again during 5 seconds of received station listening
(playback remains in this received station).
Short press theright encoder or
tune the last station received.
buttons during seeking, radio will cancel the scanning and will
Short press HK
button during seeking, radio will cancel the scanning and will execute seek up.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 13 of 65
