After user selects SK 1 [YES] in the radio and also in the device, pair is completed.
a)
If no action after 60 seconds, radio will switch to previous BT menu. If cell phone connects to radio, radio will
display cell phone name, it must be scrolled if name length is large, BT icon and the indication “CONNECTED”
per 2 sec; 5 sec timeout, radio will exit the BT menu display and reverts to LSM. The current audio output must
remain without change. The BT icon must remain visible in all menus to show that one cell phone is connected to
radio.
b)
If no action after 60 seconds radio will switch to previous BT menu; 5 sec timeout, radio will exit the BT menu
display and reverts to LSM. If cell phone connects to radio during the 300 seconds of pairing time, radio will
display “CONNECTED” per 2 sec. The current audio output must remain without change. The BT icon must
remain visible in all menus to show that one cell phone is connected to radio.
c)
During PIN CODE display time, if cell phone connects to radio, radio will revert previous BT menu and display
cell phone name, it must be scrolled if name length is large, BT icon and the indication “CONNECTED” per 2 sec;
5 sec timeout, radio will exit the BT menu display and reverts to LSM. The current audio output must remain
without change. The BT icon must remain visible in all menus to show that one cell phone is connected to radio.
Case 2: “SAMSUNG E628” cell phone has been paired and connected to radio.
In phone menu, short press SK 4 [
] button.
Radio will disconnect the current cell phone and waiting for new phone cell. Pairing process will same as 12.3
Bluetooth Pairing, case 1.
Case 3: five cell phones had been paired to radio
In phone menu, short press SK 4 [
sound.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 40 of 65
] button. Radio will display “BT FULL” per 2 seconds and output a beep
