7. CD Operation
7.1 CD insertion
At moment to insert CD, the display will show READING all of the time until radio is ready to play and then changes
to active CD mode. During reading process, volume adjustment and any other functions are not allowed; radio is
muted.
In case to insert a CD upside-down, CD damaged, dirty or with wrong type like CD Data, the display will show CD
ERROR per 2 seconds, the radio will eject this CD immediately and reverts to LSM
CD Mechanism pick up temperature > 85° degree, dis play OVER HEAT per 2 seconds, then revert to LSM.C
7.2 CD ejection
Short press HK
button to eject the CD.
At moment to eject the CD, the display does not make any indication and radio goes to LSM.
The CD ejection must be possible without ignition key inserted (K15 and S-Contact signals OFF).
If nobody takes out the CD after 10 seconds, radio will insert the CD automatically without change to CD mode.
Radio is in FM mode and there is not a CD inserted, short press HK [
per 2 seconds.
] button, radio will display “NO CD”
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 18 of 65
