If the dialed phone is rejected, radio will revert to previous mode. If the call is answered, radio will switch to active call
mode.
12.9 Incoming Call
In any mode, a phone call is coming, the radio will display the phone number of the call (total number will be fully
displayed) or contact name. Radio will display “PHONE NUMBER, PRIVATE or CONTACT NAME” depending of
phonebook registers. If information is long, then display must scroll the complete information (information showing
same as ID3 information). All of the indications in the middle line must be centered in the radio’s display.
Short press HK [
Short press SK 6 [
] button or SK 1[
] button to reject the call.
] button to answer the call.
If the call is answered, radio will switch to active call mode.
Users can adjust phone volume level during an active call via rotating the left knob and store the new volume level in
memory for the next active call, the phone volume level is 0 to 30. Next time when active call, radio will recall the last
stored phone volume level, but if previous phone volume is lower than 10, it will recall 10, if the previous phone
volume is larger than 25, it will recall 25.
12.10 Dial a call by dial voice
] button, this button activatesAfter cell phone is paired with radio, in phone menu mode, short press
SK [
communication channel to make a call in voice dialing mode, user needs to follow instructions from cell phone. In the
paired phone does not have this function, no action will be done.
Once the call is started, it continues with section 12.6. Dial a call.
12.11 Reject a call
If the radio is connected to a cell phone, while a phone call is coming, short press SK 6 [
HK [
] button, the call will be rejected. And then radio will switch back to LSM.
] button or long press
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 45 of 65
