Keep pressed left/right [
fast playing action.
] arrow buttons may fast rewind or fast forward, release button will cancel
Fast rewind operation in the first track of the CD must stop at the beginning of this track and resume normal
operation; otherwise the fast rewind operation will continue in all of the other tracks of CD.
Fast forward operation in the last track of the CD must stop at the end of this track and resume normal operation,
otherwise the fast forward operation will continue in all of the tracks of CD.
The sound must be continuous all of the time (no intermittent) and display will show fast the time during fast rewind
or fast forward playing.
7.7 MIX Play
Short press SK 3 [
] button, display will underline MIX; it means MIX function has been activated.
Radio must play randomly all of the tracks in the CD, once all the tracks have been played, a new random track list
must be generated.
Note: The played tracks shall be written into a stack-like memory (minimum 100 tracks if available). None of the
tracks stored in the stack-memory are allowed to be played twice. If there are less than 100 tracks on the medium
and all tracks have already been played, the stack memory shall be deleted completely except the last track played. If
the stack memory is full, it shall be deleted except for the last five tracks.
Short press HKbutton during MIX play, radio will advance the tracks randomly, the sequence is as follows:
random track => next random track => next random track => and so on, per example track 20 => 6 => 2 => 9 => 13
=> etc.
Short pressbutton during MIX play, radio will return only the previous track random and then the sequence
must be downward successively, the sequence is as follows: random track => previous random track => previous
track => previous track => and so on, per example track 13 => 9 => 8 => 7 => etc.
Short press SK 3 [] button again in order to deactivate this function, display will delete the underline of MIX,
it means MIX function has been deactivated.
7.8 Scan Play
Enable scan play function with short press the
right encoder.
Radio will scan all of the tracks, each track will be played per 10 seconds, and radio will stop scan function after all of
the tracks have been played, in total one cycle. Per example, if scanning started in track 5 and CD has 20 tracks, the
sequence is as follows: track 5, short press SCAN button => track 6 plays 10 sec => track 7 plays 10 sec => … =>
track 20 plays 10 sec => track 1 plays 10 sec => …. => track 5 plays 10 sec => SCAN mode finished => track 6
normal play.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 20 of 65
