In the "one folder" condition: "F+/F-" "RPT" "RPT F" "MIX F" "MIX A" are required
8.8 Scan Play
Enable scan play function with short press the
right encoder.
Radio will scan all the files of current folder and subfolders, each file will be played for 10 seconds. Radio will stop
scan function automatically after all the files of current folder and subfolders have been played 1 cycle.
During scan play process, radio will display “SCAN” characters blinking 1.5 seconds (750ms on/750ms off).
Cancel the scanning is short press the
remains in this track).
If current track play time
3 sec, short press
and will play the previous track.
If current track play time > 3 sec, short press
current track.
Short press
right encoder during the 10 seconds of track playing (playback
button during scanning, radio will cancel the scanning
button, radio will cancel the scanning and will play the
button, radio will cancel the scanning and will play the next track.
8.9 Repeat Play
Short press in sequence SK 6 [
] button will switch in order: RPT Track -> RPT Folder -> RPT OFF
The 1
st
short press [] button will enable track repeat function; radio will display “RPT” underlined, it means
RPT function has been activated. 3 sec later if short press “RPT” again radio will disable repeat play function, revert
to normal play.
The 2
nd
short press [] button will enable folder repeat function; radio will display “RPF” underlined, it means
RPT F function has been activated. 3 sec later if short press “RPF” again radio will disable repeat play function, revert
to normal play.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 27 of 65
