Moving the seat forward
x
If necessary, open the safety belt loop and guide the belt by hand as it retracts.
x
Pull up lever
(A)
and fold the backrest forward.
x
Press the
(B)
button to move the seat forward electrically.
Moving the seat back
x
Press the
(C)
button to move the seat back to its original position.
x
Pull up lever
(A)
and fold the backrest back.
WARNING
Careless or unsupervised use of the Easy Entry can cause accidents and severe injuries.
x
Never adjust the Easy Entry while driving.
For safety reasons, only use the electric Easy Entry button when the ignition is switched off.
Adjusting the front head restraints
Fig. 46
Adjusting the front head restraints.
¤
Please first read and note the introductory information and heed the WARNINGS
All seats are equipped with head restraints. The front head restraints can be adjusted up and down.
The head restraints on the rear bench seat are not adjustable.
There are notches in the head restraint guide rods so that the head restraint can lock into place. Only
properly installed head restraints can lock into place at the adjustment range notches. In order to
prevent inadvertent removal of the head restraints after installation, there are stops at the top and
bottom of the adjustment range.
Adjusting the height
x
Pull the head restraint up in the direction of the arrow, or push it down while pressing the but-
ton
⇒
fig. 46
(1)
⇒
.
x
The head restraint must lock securely in the position selected.
