Fig. 194
Replacing a light bulb in the fog light.
¤
Please first read and note the introductory information and heed the WARNINGS
Please carry out each step only in the order specified:
1.
Please review and follow the checklist
2.
Pull the cover forward in the direction of the arrow
⇒
fig. 193
.
3.
Unscrew the fastening screw
(1)
with the screwdriver from the vehicle tool kit
4.
Fold the headlight assembly slightly forward and pull out of the mounts
⇒
fig. 194
(small
arrows).
5.
Release the connector
(1)
and pull it off.
6.
Rotate the bulb holder
(2)
counterclockwise as far as it goes and pull it out with the light bulb
to the rear.
7.
Replace the burned out light bulb with a new bulb of the same type.
8.
Insert the bulb holder into the headlight assembly and turn clockwise as far as it goes.
9.
Attach the connector
(1)
to the bulb holder
(2)
. The connector must latch with an audible
“click.”
10.
Slip the headlight into the mounts (small arrows) and fold rearward.
11.
Screw the fastening screw
⇒
fig. 193
(1)
tightly with the screwdriver.
12.
Insert the cover into the bumper .
Different models may have different lights, and the location and design of covers, bulb holders,
and bulbs may be in a different location than shown in the illustrations.
Replacing taillight bulbs in the luggage compartment lid
¤
Please first read and note the introductory information and heed the WARNINGS
LEDs in the taillights in the luggage compartment lid
Changing LEDs is not possible without dismantling vehicle components. Contact an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility.
