Fig. 141
Rear Assist display.
¤
Please first read and note the introductory information and heed the WARNINGS
on
page 321.
In order to
Operation
Automatically activate display:
Shift into Reverse when the ignition is switched on or the
engine is running.
Manually deactivate display:
Press a function selection button on the radio or the
navigation system
⇒
booklet
Radio
or
⇒
booklet
Navigation
system
.
OR:
Switch off the ignition. The Rear Assist display turns off
after a few seconds.
Switch off display by shifting out of
Reverse:
The camera display switches off.
Deactivate display by driving
forward:
Drive forward faster than about 10 mph (15 km/h).
Screen
Press the
Options
function button at the bottom of the screen to:
x
Adjust the display brightness, contrast, and color.
x
Display or hide the Park Distance Control display and adjust the volume (if equipped).
Special considerations
1) Do not use Rear Assist in the following situations:
– When an incorrect or unclear image is displayed, such as when there is poor visibility or the lens is
dirty.
– If the area behind the vehicle cannot be seen clearly or completely.
– If the rear of the vehicle is heavily loaded.
– When the luggage compartment lid is open.
– If the driver is not familiar with the system.
– If the position or angle of the camera has changed, such as after a rear-end collision. Have the
system checked by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
