Instruction Manual
Voith Turbo
I/H Converter DSG-BXX112
I/H Converter DSG-BXX102
09 / 03 cet - Ochs/ZAN1
Voith Turbo GmbH & Co, KG
Page: 16 / 21
3.626 - 018877 en
D – 74564 Crailsheim
7.
Operation
7.1
Operation with manual knob
Operation with manually controlled rotary knob is possible without electric
energy.
On operation with manually actuated rotary knob, uncontrolled stroke
movements of the hydraulic components controlled by the I/H converter
output might occur due to the increase in the output signal pressure.
Manual operation is only possible when the circlip is removed from the
manual operation knob.
On completion of operation with manual operation knob, move the
manual operation knob in its final position by turning it counter clockwise
and pushing in the circlip to its final position.
·
Remove the circlip.
·
Slowly turn the manual operation knob clockwise and observe the
output pressure.
Effective direction:
Output pressure increase by clockwise rotation.
7.2
Operation with set signal
When the supply voltage is switched on, the output signal pressure can
be adjusted continuously by the set signal 0/4...20 mA within the limits
set by the potentiometers X0 und X1.
