VoIPon 2N BRI Lite, User Manual, Page: 89 / 102

83
Routing Paramaters
%A##=clip,dial,limit
...set autorouting item (ix 0..95)
clip (20), dial(20), limit(0=off,1..99 minutes)
%R##=net,hh:mm/hh:mm/w+-,groups,lim ...set lcr-routing item (ix 0..63)
net (1..8), groups = (max 7 chars=1..3,9), 3=any module, 9=bri2
call limit (0=off, 1..99min)
last LCR table line must be empty
; totals
; first m,c,s
...inc. minutes,calls,smses
; second m,c,s
...out. minutes,calls,smses
; ri,ro
...redirected inc,out calls
%TB#=m,c,m,c
...init minutes,calls in bri # (0..65535)
%TBALL=m,c,m,c
...init minutes,calls in all bris (0..65535)
%TG#=m,c,ri,ro
...init minutes,calls,rin,rout in group # (0..65535)
%TGALL=m,c,ri,ro
...init minutes,calls,rin,rout in all groups (0..65535)
%TI#=m,c
...init minutes,calls in inc.group # (0..65535)
%TIALL=m,c
...init minutes,calls in all inc.groups (0..65535)
%T##=1,m,c,s,m,c,s
...init minutes,calls,sms in mod ##, sim 1 (0..65535)
%TALL=1,m,c,s,m,c,s
...init minutes,calls,sms in all mods, sim 1 (0..65535)
Tracing commands
AT!RE
Start tracing of error messages active interface.
AT!Lx
Start tracing of LAN & Telnet on layer x
x=2 – Layers IP,TCP,Telnet
x=3 – Layers TCP, Telnet
x=4 – Layer Telnet
AT!Rx
Start tracing of ISDN BRI & GSM on layer x
x=1 – Layers 1,2,3,4
x=2 – Layers 2,3,4
x=3 – Layers 3,4
x=4 – Layer 4
AT!RR Start tracing (AT!R2) to COM interface
AT!RX
Stop tracing (AT!R2) to COM interface
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299