2N
®
BRI Lite gateway
68
Same setting as GSM module 1
- this checkbox sets the same
parameters for GSM module 2 as on the GSM module 1 fold
7.11.1.
Mode
Set the way the GSM gateway shall process incoming calls from
the GSM network.
Reject incoming calls
– all incoming calls from the GSM
network are rejected automatically.
Ignore incoming calls
– all incoming calls from the GSM
network are ignored automatically. The calling subscriber
hears the ringing tone.
Receive incoming calls + voice message
– incoming calls
from the GSM network are received and, if defined so,
the DTMF with a voice message is enabled for the
incoming call.
Receive incoming calls + dialtone
– incoming GSM calls
are received incoming calls from the GSM network are
received and, if defined so, the DTMF with a simulated
dialtone is enabled for the incoming call.
CallBack after ring / Reject –
in case the CLIP is
included in the CallBack table, a CallBack is made. The
GSM gateway rejects the incoming call and makes an
automatic CallBack.
CallBack after ring / Ignore –
in case the CLIP is
included in the CallBack chart, a CallBack is made. The
incoming call is ignored. If the calling subscriber does
not hang up within the defined timeout (default = 10s),
the CallBack function is ignored and the call is processed
normally (refer to Subs. 1.5).
Report to PC + voice message –
the GSM gateway sends
information on an incoming call to the PC equipped with
the call routing software. The DTMF with a voice
message may be enabled for the incoming call.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299