2N
®
BRI Lite gateway
66
7.10.5.
CLIR function
CLIR
– This parameter defines whether or not the calling SIM
card telephone number shall be displayed to the called party. It
is not recommended to present the telephone number of the
SIM card inserted in the GSM module to the called party to
avoid problems with calling back. It is impossible for technical
reasons to transmit telephone numbers of ISDN terminals to a
GSM network. One of the following parameters can be set for
each GSM group:
Default –
default settings of the GSM provider.
Disable (CLIP on) –
the SIM card telephone
number is transmitted to the GSM network.
Contact your GSM provider for activation of this
service if it is not supported automatically.
Enable (CLIP off) –
the SIM card telephone
number is not transmitted to the GSM network.
CAUTION!
Some GSM providers do not support
this function, which might lead to rejection of an
outgoing call.
7.10.6.
Disconnect call
Disconnect call
– the currently made call is disconnected in
cases included in the pull-down menu.
7.10.7.
Statistics
Day of deleting stats in group –
defines the day on which
statistic data on disconnected calls are deleted.
7.10.8.
Messages to ISDN
Delay before send CONNECT [s]
– a delay before sending
information on a connected call after reception from the GSM
network.
Delay for ALERTING [s]
– timeout for generating of
ALERTING message by the GSM gateway in case the gateway
does not receive ALERTING message from GSM network
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299