45
Test calls –
for make test calls (for check voice qualitz or right
configuration). Test calls can be outgoing to GSM or ISDN
interface, or incoming). In case of proceeding call the gateway
automativally generates trace, which you can save for possible
check in case of problems.
Online commands –
for sending AT command directly to
selected GSM module
Show dynamic CLIP routing table –
downloads actual records
of Dynamic CLIP routing function.
Load parameters fro gateway
– downloads configuration of the
gateway from the gateway to the configuration program.
Save parameters to the gateway
– uploads configuration
parameters form the program to the gateway.
Gateway reset
– resets the gateway.
Factory parameters reset
– restarts the gateway with company
settings.
6.3.4. Setting
This menu is available under
Communication setting
- helps set the type of communication
of the 2N
®
BRI Liteconfiguration software. By clicking on this
item you open a configuration window (see Fig. 25). You can
use a USB cable, or remote GSM (CSD) for communication
with the GSM gateway.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299