71
7.12. Prefixes
Fig. 33 - Network List Editing Window
The List of prefixes helps the gateway connect calls to various GSM networks.
You can define call routing by prefixes in eight groups.
Default
sets the current
list to default settings.
Default all
sets all prefixlists to default setting. You will
find the following items in the editing window:
Table of replaced prefixes
– a table of prefixes to be replaced
(e.g. '+420' with '0'). This change is made before the prefix
table is checked.
Table of prefixes
– a table of called prefixes. You can define
the dialling length too here. If you do not enter the dialling
length, the
Default count of digits
will be used automatically.
GSM network ID –
a numerical identification code of the
selected prefix table used for internal identification purposes
only. It has no influence on call routing.
Default count of digits –
used for defining the count of digits to
be considered if the count is not included in the prefix table.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299