background image

 

 

SATELLINE-EASy Pro 35W 

 

 

User Guide v.1.4

 

 

IMPORTANT NOTICE 

 
All rights to this manual are owned solely by SATEL OY (referred to in this user guide as SATEL). 
All rights reserved. The copying of this manual (without the written permission from the owner) by 
printing, copying, recording or by any other means, or the full or partial translation of the manual 
to any other language, including all programming languages, using any electrical, mechanical, 
magnetic, optical, manual or other methods or devices is forbidden.  
 

SATEL reserves the right to change the technical specifications or functions of its products, or to 
discontinue the manufacture of any of its products or to discontinue the support of any of its 
products, without any written announcement and urges its customers to ensure, that the 
information at their disposal is valid.  
 
SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind of 
warranty including guarantees on suitability and applicability to a certain application. Under no 
circumstances is the manufacturer or the developer of a program responsible for any possible 

damages caused by the use of a program.  The names of the programs as well as all copyrights 
relating to the programs are the sole property of SATEL.  Any transfer, licensing to a third party, 
leasing, renting, transportation, copying, editing, translating, modifying into another 
programming language or reverse engineering for any intent is forbidden without the written 
consent of SATEL. 
 

SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE USED IN 
ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTION NOR AS A PART OF 

ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY IF THEY 
ARE USED IN ANY OF THE APPLICATIONS MENTIONED.  
 
Salo, FINLAND 2013 
 
 
 
 
 

 
 
 
 
 
 
 

Copyright: 2013 SATEL Oy 
No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without the 
prior

 

written permission of SATEL Oy. 

 

This document is provided in confidence and must not be distributed to third parties without the express permission of SATEL Oy.

 

Summary of Contents for SATELLINE-EASy Pro 35W









































































































Reviews: