Vogt P18AL TUBE-ICE, Service Manual

Page: 3 / 88

8/28/00
Warranty Registration / Start-Up Form
(Medium & Large Machines)
Model Number: __________________________ Serial Number: __________________________
This form must be filled out completely and signed by the customer in order to assure acceptance by Vogt.
Date of Start-Up: _______________________________ Form Completed By: _____________________________________
AC Condenser Model Number: _____________________ AC Condenser Serial Number: _____________________________
Water Treatment System? Yes No Manufacturer: ____________________ Model: ________________________
Bin Manufacturer: _______________________ Model: _________________________ Bin Capacity: _______ lbs.
Distributor
Company Name: ____________________________________________ Phone: _______________________
Address: ____________________________________ City: _________________________ State: ___________ Zip: ___________
Service Company
Company Name: ____________________________________________ Phone: _______________________
Address: ____________________________________ City: _________________________ State: ___________ Zip: ___________
Customer (location of equipment)
Company Name: ____________________________________________ Phone: _______________________
Address: ____________________________________ City: _________________________ State: ___________ Zip: ___________
PRE-OPERATION CHECK
Service Manual on hand
Machine room suitable 50
°
F minimum, 110
°
F maximum
Power Supply ______ V _____ PH _____ Hz (machine not running)
Compressor crankcase heater on 12 hour minimum
All valves opened or closed as tagged
Solenoid valve stems in auto position
System leak checked/tight
Auxiliary equipment overloads wired into control circuit
Water supply and drains connected properly
Sufficient make-up water supply (minimum 30 PSIG)
Instruction manual and warranty certificate left on-site
Name of person left with: __________________________________
OPERATION CHECK
Power Supply ______ V _____ PH _____ HZ (machine running)
Pump , cutter & other motor direction of rotation correct
Cutter motor amps RLA__________ Actual __________
Water pump amps RLA__________ Actual __________
Condenser motor amps (if applicable) _________
Incoming potable water temperature: _____
°
F
All water distributors in place (visually inspected)
Make-up water float valve operates properly
Clear ice
Yes No
Hour meter in control panel connected and operating
Suction Pressure: End of freeze ________ End of harvest ________
Discharge Pressure: End of freeze ________ End of harvest ________
Test
Cycle
Make-up Water
Temp
Freeze Time
Min/Sec
Harvest Time
Min/Sec
First Ice Out
Min/Sec
All Ice Out
Min/Sec
Avg. Hole
Size
Ice
Lb. Per Harvest
Ice
Lb. Per Day
#1
#2
#3
#4
Note: Ice lb. per day can be found by:
Remarks:
Technician Signature: ___________________________ End User Signature:_____________________________
I certify that I have performed all of the above procedures.
1440
×
+
me) harvest ti time (freeze
harvest per lb. ice
Tube Ice L.L.C.
1000 W. Ormsby
Louisville, KY 40210
(502) 635-3235
FAX #502-635-3024
THIS FORM MUST BE SENT TO
VOGT TO ACTIVATE WARRANTY
Vogt Order Number: ____________________