P18AL Service Manual
RECEIPT OF YOUR TUBE-ICE MACHINE
3/6/07
2-2
Safety Valves
Two safety pressure relief valves are an integral part of the low-side Tube-Ice
®
machine. Both are located on the top of the freezer. Vent the pressure relief valves to the
atmosphere in such a manner as to comply with local and national codes.
Rated Capacity
The Tube-Ice
®
machine is rated to produce a given amount of ice when operating
under the proper conditions as specified in this manual (see Section 10 for the operating
specifications). You should be prepared to handle the ice produced as it is discharged from the
machine and move it to your storage or bagging area promptly.
The machine nameplate is located on the front of the control panel. The model number and machine
description are located in the top left hand corner. The following figure can be used to verify that
the correct model has been received.
Figure 2-1
Vogt Model Nomenclature
Nominal Capacity
"02K" - 2000 lbs/day
(
"K" = 1000's lbs/day, "T" = tons/day)
"03K" - 3000 lbs/day
"04K" - 4000lbs/day
(
Consult Specifications for Actual Capacity)
"03T" - 3 tons/day
"05T" - 5 tons/day
"10T" - 10 tons/day
"25T" - 25 tons/day
"50T" - 50 tons/day
"80T" - 80 tons/day
Electrical Codes
"26" - 208/230-3-60
"46" - 460-3-60
"56" - 575-3-60
"25" - 200-3-50
"45" - 400-3-50
"21" - 230-1-60
Refrigerant
"F" - R-22
"A" - Ammonia
"H" - R-404a
Type of Ice
"B" - Cylinder
"K" - Crushed
"D" - Dual Ice (Cru & Cyl)
"L" - 1 1/2" Long Cylinder
"X"- 2” Long Cylinder
Condenser Type
"AC" - Air Cooled
"WC" - Water Cooled
"HP" - High Pressure Water Cooled
"SW" - Sea Water
"NC" - No Condenser
Tube Size
(in 1/4's of an inch)
"4" - 1"
"5" - 1 1/4"
"6" - 1 1/2"
"8" - 2"
Product Variation Codes (
An alphanumeric designator assigned to specific variations.)
"000 or Blank" – Standard Product
If unsure of the product code shown on your machine please consult the factory.
Model Variation
A number assigned to indicate major
variations within any one family series.
Basic Configuration
"P" - Package
"L" - Low-side
"H" - High-side
XXXX – XXXX – XXXX – XXX
Summary of Contents for P18AL TUBE-ICE
