Safe use
20
Subject to modifications
US edition 2021/01
VOGT Air Lance Original operating manual
Contact:
+49(0)92 78-774 33-0
+49(0)92 78-774 33-11
www.vogt-tec.com
Operating the VOGT Air Lance
A high output can only be achieved if the compressor air is dosed correctly
and the VOGT Air Lance is operated correctly. The angle at which the VOGT
Air Lance is used is extremely important. If the angle is too shallow, the
air flow slips off the surface and becomes ineffective. We recommend an
angle of at least 60°; the optimum angle is 90°.
The VOGT Air Lance is very effective used on solid materials in a circular
motion. It is important to keep the areas to be worked on free from
released material.
1. Open the stop cock.
2. Gently place the VOGT Air Lance onto the material. Even a distance of
more than two centimeters to the object to be processed makes the
air flow ineffective.
3. Use your hand to operate the trigger lever. It must never be locked in
place using any auxiliary equipment.
4. Regulate the emitted air volume on the stop cock.
5. Release the trigger lever as soon as you change the position or
complete the work.
