Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
Page 20 of 114
4
Configuring the Unit
The following is an overview of the first few configuration steps for your unit.
Step 1 Provide power and connect a computer to control your Vocality unit
Figure 4-1 Connecting your unit
Step 2 When prompted enter your username and password
Factory defaults are
Username:
Vocality
and
Password:
Vocal1ty
(Note: The password uses the number 1 instead of the letter i.)
You can change these in the Users menu, once you have logged in.
Step 3 From the Banner page, select menus to configure
Figure 4-2 Web interface
Select from menu groups along the top
and menus down the left hand side.
When you change any data on
a menu the top of that menu will turn
orange.
After entering data select
Validate. If your change means extra fields
need to be completed, these will then
Figure 4-3 M&C interface
Press the up arrow key < > to see the
menus.
To select a menu highlight it and press
