G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
8
Daisy chain connection with other GeoBox models
➢
If Loop out port has not been used, user can use loop out port to connect with monitoring system in
control room to see the status of the video wall content.
4. System Connection and Power On
➢
Poor quality HDMI cable and signal source will affect the connection distance and may cause signal
noise or intermittent display.
➢
To ensure all cables are connected correctly, it is recommended to use locking cables.
➢
Complete video wall system should be connected to one power Distribution Box with proper
grounding. Power on the system after finishing all connections to avoid system damage by floating
voltage among devices.
➢
When power is switched on, the booting time is about 19 seconds and the Input & Output LEDs on
front panel will stay
“Light up” for the channel with correct input source and output monitor
connections.
No specific output connection sequence is required.
Location can be set by Video Wall [PAN] menu.
G406s
G406s
G408
