G406s User Guide Document: G406s-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
25
smooth video quality.
➢
If the input signal is interlaced signal (interlaced-1080i), and the image is rotated or flipped, then
the channel will have no [3D Motion adaptive de-interlaced] processing function. If user applies
static image source, the output video will have a slight jitter phenomenon. The processing channel
quality will be reduced. Use a progressive signal source setting (1080p/2160p) whenever possible.
➢
Please press [INFO] shortcut key to check the input/output signal settings.
17.5. System setting can
’t be executed:
➢
System control applied to complete system can only be executed through CH-1.
➢
After FW update, please insert small pin into RESET hole on back panel for 5 seconds to reset the
system to default to eliminate unnecessary settings. It will not affect Profile Index storage data.
➢
After Reset, user will see “Reset to Default” message and the FW update process is finished.
17.6. Synchronization issue in the outputs
➢
The input refresh rate should be the same as output refresh rate so that the system can implement
Frame Lock to synchronize all the outputs. If the input source is 50Hz with 60Hz output, then it is
possible to see some lag among the displays.
➢
The display devices may have different delay time under different settings. For examples, if the
system with high end video processing, such as noise reduction or ME/MC, it may increase few
frame delays. Please make sure all the display with the same settings.
➢
Please set Options
→
Setting
→
Frame Lock as [Normal] to implement Frame Locked function while
using multiple units of G406s to avoid not synchronization or frame tear issues.
➢
It will apply to two channels at the same time..
18. Technical support
➢
User can send e-mail to [email protected] together with as much information as possible.
➢
The following information is required for a swift response.
✓
Sink device (monitor): type and model number
✓
Monitor layout or specific application details (shape of video wall).
✓
GeoBox model No. and series No.
✓
Detailed timing of signal source and resolution.
✓
Press [Info] key to get System Information and send the data to us, including input/output
timing and F/W version.
✓
The exact nature of the problem. Please be as detailed as possible.
✓
If possible, please attach the Pictures of the issue.
✓
Usually we will response with 24 hours (excluding weekends)
✓
Please note that if the machine is sent back for repair, user needs to pay for some delivery
cost.
